Promoção da alimentação adequada e saudável

Ciclo de debates da Política Nacional de Alimentação e Nutrição. Promoção da Alimentação Adequada e Saudável.

Processing environment monitoring in low moisture food production facilities: Are we looking for the right microorganisms?

Processing environment monitoring is gaining increasing importance in the context of food safety management plans/HACCP programs, since past outbreaks have shown the relevance of the environment as contamination pathway, therefore requiring to ensure the safety of products. However, there are still many open questions and a lack of clarity on how to set up a meaningful program, which would provide early warnings of potential product contamination. Therefore, the current paper aims to summarize and evaluate existing scientific information on outbreaks, relevant pathogens in low moisture foods, and knowledge on indicators, including their contribution to a "clean" environment capable of limiting the spread of pathogens in dry production environments. This paper also outlines the essential elements of a processing environment monitoring program thereby supporting the design and implementation of better programs focusing on the relevant microorganisms. This guidance document is intended to help industry and regulators focus and set up targeted processing environment monitoring programs depending on their purpose, and therefore provide the essential elements needed to improve food safety.

Colonisation dynamics of Listeria monocytogenes strains isolated from food production environments.

Listeria monocytogenes is a ubiquitous bacterium capable of colonising and persisting within food production environments (FPEs) for many years, even decades. This ability to colonise, survive and persist within the FPEs can result in food product cross-contamination, including vulnerable products such as ready to eat food items. Various environmental and genetic elements are purported to be involved, with the ability to form biofilms being an important factor. In this study we examined various mechanisms which can influence colonisation in FPEs. The ability of isolates (n = 52) to attach and grow in biofilm was assessed, distinguishing slower biofilm formers from isolates forming biofilm more rapidly. These isolates were further assessed to determine if growth rate, exopolymeric substance production and/or the agr signalling propeptide influenced these dynamics and could promote persistence in conditions reflective of FPE. Despite no strong association with the above factors to a rapid colonisation phenotype, the global transcriptome suggested transport, energy production and metabolism genes were widely upregulated during the initial colonisation stages under nutrient limited conditions. However, the upregulation of the metabolism systems varied between isolates supporting the idea that L. monocytogenes ability to colonise the FPEs is strain-specific.

Review of Experience of the Production of Salt Fortified with Iron and Iodine.

The double fortification of salt with iodine and iron has been proposed as a method for the mass prevention of iron deficiency anemia. This article reports on the technical and financial aspects of the production of such double fortified salt (DFS) based on the experiences of current and past producers. It draws contrasts with the established process of fortifying salt solely with iodine particularly examining the cost and complexity of the processes involved. Based on these factors it questions the commercial viability of existing DFS formulations and thus their sustainability as vehicles for the widespread distribution of iron outside a subsidized environment. It makes suggestions for the future development of DFS particularly relating to the development of less expensive iron formulations suitable for use with lower quality salts and identifies key technical and economic areas to be taken into account when considering the production of DFS.

Cleaning and disinfection programmes in food establishments: a literature review on verification procedures.

In food establishments, cleaning and disinfection programmes contribute to provide the environmental conditions that are necessary for the production of safe and healthy food. Compliance with validated programmes is evaluated through verification activities, in order to establish, through objective evidence, if they are implemented as they were written and if they are effective, achieving continuous improvement of the sanitation programmes. In accordance with the specific guidelines of each country, food companies set up their technical specifications and develop their own cleaning and disinfection programmes. Depending on the analytical method used, one of the main challenges was to establish a reasonable limit of acceptability according to the impact that each surface has on the safety and hygiene of the food that is prepared. This review was focused on the procedures implemented to verify the cleaning and disinfection programmes in food establishments. In particular, this study examines the methodologies used (audits and analytical methods), sites for the collection of samples, acceptance criteria and main findings. The results of the analysed studies constitute a scientific basis for designing or improving sanitation procedures and their verification in food companies, and also provide relevant information for food safety authorities.

Effect of peracetic acid on ascospore-forming molds and test microorganisms used for bio-validations of sanitizing processes in food plants.

Industrial sterilization of packaging and filling machineries by peracetic acid (PAA) is a widespread practice. In our study we assessed the resistance to PAA of three ascospore-forming molds (Chaetomium globosum ATCC 6205; Talaromyces bacillisporus SSICA 10915; Aspergillus hiratsukae SSICA 3913) compared to that of Aspergillus brasiliensis ATCC 16404 and Bacillus atrophaeus DSM 675, that are currently used as test microorganisms during industrial bio-validations of food packaging and machineries. Tests were carried out at 40 °C using 1,000 mg/l of PAA, with or without a supporting material (aluminium, tin-plate, PET). At all conditions tested, a greater resistance to PAA was registered for C. globosum, followed by T. bacillisporus, A. hiratsukae, A. brasiliensis and B. atrophaeus. D-values of C. globosum varied from 23 to 68 min, whereas T. bacillisporus showed D-values from 83 to 352 s and A. hiratsukae showed D-values from 32 to 65 s. Surprisingly, both test microorganisms (A. brasiliensis and B. atrophaeus) proved less resistant than ascospore-forming molds tested, their D-values being always lower than 30 s. Cells treated without a supporting material proved more resistant than those deposited on plastic or metallic strips, with the exception of tin-plate, where results approaching those obtained without a supporting materials were obtained. Based on the results obtained in this paper, test microorganisms currently used for bio-validations in industrial plants and also heat-resistant strains proved sensibly less resistant to PAA than C. globosum. Therefore, for practical purposes C. globosum should be furtherly studied to understand if its use during bio-validations of sanitizing processes could lead to more performing results.

Tracing Listeria monocytogenes contamination in artisanal cheese to the processing environments in cheese producers in southern Chile.

Artisanal cheese from southern Chile is made primarily by rural families who raise dairy cows and produce cheese as a way to add value to their milk. The most common cheese produced is chanco, a semi-hard cheese that is typically sold in unauthorized markets. The methods of chanco production do not always follow good manufacturing practices; however, the presence of Listeria monocytogenes contamination in this cheese has not been previously documented. To better understand production practices and L. monocytogenes contamination, 39 cheese producers were surveyed with regard to infrastructure, cleaning and sanitation, pest control, personal hygiene, training, raw materials, and manufacturing. During four sampling trips in 2016 (March, May, August, and November), 546 samples were collected (468 cheese samples and 78 milk samples). For producers that tested positive for L. monocytogenes, environmental monitoring was also conducted, for which 130 additional samples were collected. Presumptive L. monocytogenes isolates (N = 94) were further characterized and subtyped using standard techniques and qPCR-based species/subtype verification; a subset of 52 isolates were also subtyped by Pulsed Field Gel Electrophoresis (PFGE). L. monocytogenes was found in 19 cheeses (4.1%) from five producers (12.8%). The most frequent serotypes were 1/2b (48.9%), group 4B (4b, 4d, 4e) (45.7%), and serotype 1/2a (5.4%). Although no milk samples tested positive for L. monocytogenes, all cheese samples from two producers tested positive during two of the samplings. Distinct PFGE types were recovered from each facility, demonstrating persistence of certain subtypes of the pathogen that ultimately caused end-product contamination. Environmental monitoring of the five positive producers revealed a prevalence of L. monocytogenes ranging from 0 to 30%, with food contact surfaces having the highest incidence of this organism. The findings of this study contribute to the understanding of L. monocytogenes incidence in artisanal cheese in the region of southern Chile.

Symposium review: Recent advances in dairy food safety research: An overview of the National Dairy Council Listeria Consortium, industry identification, and funding of research gaps.

Consumers should have confidence that dairy foods are safe to eat. The Food Safety Committee of the Innovation Center for US Dairy (IC), created in 2010 to help processors collectively improve practices and reduce risks in dairy foods, is an industry-wide food safety collaboration that aims to protect the public through its mission to "Strengthen manufacturing practices in all dairy processing facilities and advance science-based tools to diminish food safety risks that could compromise the reputation of the U.S. dairy industry." The IC Listeria Research Consortium, a subset of the IC Food Safety Committee, funds research directed at creating new tools and practices to control Listeria in finished products and in manufacturing plants. This synopsis summarizes a presentation on the work conducted by the IC Food Safety Committee and research funded by the IC Listeria Research Consortium that was part of a symposium highlighting recent scientific findings and potential practical approaches to better control Listeria using science-based tools.

The synergistic effect of enzymatic detergents on biofilm cleaning from different surfaces.

Biofilm growth is a significant source of contamination in the food industry. Enzymes are considered green countermeasures against biofilm formation in the food industry owing to their biodegradability and low toxicity. In this study, the synergistic effect of enzymes was studied against biofilm cleaning from hard surfaces. A mixed-microbial sample was sourced from a meat packaging line and biofilms were grown under high shear conditions on stainless steel and polyethylene surfaces. A model cleaning-in-place (CIP) parallel-plate flow chamber was used for firstly, the enzymatic cleaning and secondly, a disinfection step. The cleaning effectiveness was evaluated in response to different formulations containing non-foaming commercial surfactants among with amylase, protease and lipase at neutral pH. The formulation combining all three enzymes was the most effective, showing a synergy essential for the deformation of biofilm structure and consequently better disinfection of both material surfaces.

Effective countermeasures for Salmonella contamination in actual oilmeal-manufacturing plant in India.

AIMS: Salmonella contamination in the manufacturing process of an overseas oilmeal plant was investigated and countermeasures for Salmonella contamination were evaluated. METHODS AND RESULTS: Salmonella was detected from deposits and adhered materials inside the main processing equipment. Specifically high contamination was observed in the equipment associated with the meal cooler, with several Salmonella serovars being detected. A number of Salmonella serovars were also detected in the equipment of the fine powder recovery process. To prevent Salmonella contamination of oilmeal products, effective countermeasures that have been employed in Japan were implemented. By removing residues from the equipment and disinfecting the interior of the equipment, a significant decrease in the contamination rate of oilmeal products was achieved compared to before sanitation (P < 0·05). CONCLUSIONS: Effective countermeasures to control Salmonella contamination in the overseas manufacturing process of oilmeal were established. SIGNIFICANCE AND IMPACT OF THE STUDY: This is the first report focusing on Salmonella countermeasures in an actual oilmeal-manufacturing plant overseas.

Monitoring Sodium Content in Processed Foods in Argentina 2017-2018: Compliance with National Legislation and Regional Targets.

Sodium intake in Argentina has been estimated to be at least double the dose of 2000 mg/day recommended by WHO, mostly coming from processed foods. Argentina is one of the few countries in the world that have regulated sodium content in certain food products. This study presents an assessment of sodium content in a selection of food groups and categories as reported in the nutrient information panels. We surveyed 3674 food products, and the sodium content of 864 and 1375 of them was compared to the maximum levels according to the Argentinean law and the regional targets, respectively. All food categories presented high variability of sodium content. Over 90% of the products included in the national sodium reduction law were found to be compliant. Food groups with high median sodium, such as condiments, sauces and spreads, and fish and fish products, are not included in the national law. In turn, comparisons with the lower regional targets indicated that almost 50% of the products analyzed had sodium contents above the recommended values. This evidence suggests that enhancing sodium reduction in processed foods may be a necessity for public health objectives and it is also technically feasible in Argentina.

Molecular Characterization of Multidrug-Resistant Escherichia coli Isolates from Edible Offal in Korea.

HIGHLIGHTS: Edible offal is significantly contaminated by antimicrobial-resistant Escherichia coli. E. coli from edible offal is harboring various antimicrobial resistance and virulence genes. Improvements in hygienic conditions of edible offal production is required.

Evaluation of ATP bioluminescence-based methods for hygienic assessment in fish industry.

AIMS: To evaluate ATP bioluminescence-based hygiene monitoring systems under conditions relevant to fish processing environments. METHODS AND RESULTS: The ATP bioluminescence of fish fractions that are potentially present after insufficient cleaning of fish processing environments was determined. Different fractions and interfering substances representing the stages from slaughtering to smoking were prepared and measured using two different commercial systems (SystemSURE Plus and Clean-Trace). ATP bioluminescence was quenched by acidic liquid smoke and by sodium chloride even at concentrations as low as 0·9% NaCl. Large variations were observed between different types of trout homogenates: the ATP bioluminescence from raw belly fat homogenate was 100-1000 times lower than for trout blood. There were about a 1000-fold lower ATP bioluminescence in raw compared to heat-treated fractions from trout, with the exception of blood. The bioluminescence from Listeria monocytogenes was very low. Results from fish processing plants supported the laboratory findings. CONCLUSIONS: The output from ATP-monitoring instruments depends on the nature of fish soil present, as well as the presence of sodium chloride and low pH. This may lead to considerable under- or overestimation of the level of organic soil. SIGNIFICANCE AND IMPACT OF THE STUDY: ATP bioluminescence instruments are widely used by the fish industry for monitoring hygiene. The monitoring method will only give valuable information about the hygiene if critical limits are set after a validation period, distinguishing between areas with different types of soil and between different hygiene zones.

Processing plant and machinery sanitation and hygiene practices associate with Listeria monocytogenes occurrence in ready-to-eat fish products.

Listeria monocytogenes causes the foodborne illness listeriosis, which exhibits high fatality among people in risk groups. The incidence of listeriosis has increased in Europe, which raises concerns about L. monocytogenes occurrence in foodstuffs. Ready-to-eat seafood products are considered particularly risky vehicles. Poor hygiene at processing facilities predisposes them to L. monocytogenes contamination, which can be controlled by stringent self-checking system measures. We examined the association of fish-processing plant operational and hygiene practices with the occurrence of L. monocytogenes in vacuum-packaged gravad (cold-salted) and cold-smoked salmon and rainbow trout products. Product sampling of 21 fish-processing plants was carried out, and operational procedures relating to L. monocytogenes control were surveyed using an in-depth risk assessment questionnaire. L. monocytogenes occurred only in sliced and mainly in gravad products of seven fish-processing plants. Shortages in preventive measures were discovered predominantly among the L. monocytogenes positive fish-processing plants. Using generalized linear modeling, we identified the following features associated with L. monocytogenes product contamination: the number of processing machines, deficiencies in the processing environment and machinery sanitation, and staff movement from areas of low toward high hygiene. Furthermore, performing frequent periodic thorough sanitation alongside everyday sanitation practices associated with a decreased risk of product contamination.

Healthy and Concentrated Cannabis Plants: How to Use Acronyms to Optimize Production.

In an industry that has only recently and slowly moved out of the shadows of illegality, regulations and guidelines for cannabis product safety are just catching up to the standards of other industries. Often, our industry has had to introduce best practices and self-regulation to ensure the safety of our products and customers, as well as to help any regulating body in building such frameworks. This article will focus on how OutCo has implemented Hazard Analysis and Critical Control Point (HACCP) protocols to ensure the safety of every aspect of the production pipeline. The prevention of mold growth in drying flowers would be a classic example of food safety and is our prime example of how HACCP has informed our approach to this task. HACCP also contributed to the prevention of pesticide contamination, worker safety, and cannabis oil formulation.

Dietary sources of sodium among Brazilian population: data from Latin American Nutrition and Health Study (ELANS) / Fuentes dietéticas de sodio entre la población brasileña: datos del estudio latinoamericano de nutrición y salud (ELANS)

Introduction: The average daily intake of sodium in Brazil is 4.11 g/d, which is higher than that in most countries worldwide. Objective: This study aimed to investigate the main food sources of sodium in a representative sample of Brazilian population, considering sex, age group, and Brazilian macro-regions. Methods: 2,000 individuals aged 15-65 years were included in the Brazilian Nutrition and Health Study (EBANS). EBANS is part of the Latin American Study of Nutrition and Health (ELANS), a multicenter cross-sectional study of a nationally representative sample of urban populations from eight Latin American countries (Argentina, Brazil, Chile, Colombia, Costa Rica, Ecuador, Peru, and Venezuela). Results: The top 10 dietary food sources of sodium were beef and main dishes without processed meat (21.55%), white bread, approximately 50g (known as French bread in Brazil) (12.38%), rice (11.23%), processed meat products (8.38%), pasta (with or without sauce) (4.74%), beans (3.41%), salt (3.39%), butter or margarine (2.63%), crackers (white or whole) (2.59%), and milk (2.26%), accounting for 72.57% of the total contribution. Independent of sex, age group, or Brazilian macro-regions, the main contributors to sodium intake were beef and main dishes without processed meat, followed by French bread. Discussion: It is important to emphasize that the main described foods among Brazilians, are part of cultural and regional aspects that influence choices and food consumption and greatest contributors to sodium intake. Conclusions: These results highlight the need for implementation of public health policies to control the use of sodium in food industry and to aware the community about the addition of salt in food preparation and their food choices

Introducción: La ingesta diaria promedio de sodio en Brasil es 4.11 g / d, siendo mayor que en la mayoría de los países. Objetivo: Este estudio tuvo como objetivo investigar los principales alimentos fuente de sodio en una muestra representativa de la población brasileña considerando sexo, grupo de edad y macrorregiones brasileñas. Métodos: se incluyeron 2.000 individuos de 15 a 65 años. en el Estudio Brasileño de Nutrición y Salud (EBANS). EBANS forma parte del Estudio Latinoamericano de Nutrición y Salud (ELANS), un estudio transversal multicéntrico de una muestra nacional representativa de poblaciones urbanas de ocho países latinoamericanos (Argentina, Brasil, Chile, Colombia, Costa Rica, Ecuador, Perú y Venezuela). Resultados: Las 10 principales fuentes alimenticias de sodio fueron: Carne de vacuno y platos principales sin carne procesada (21.55%). Pan blanco, aproximadamente 50g (12,38%), arroz (11,23%), productos cárnicos procesados (8.38%), pasta (con o sin salsa) (4.74%), frijoles (3.41%), sal (3.39%), mantequilla o margarina (2.63%), galletas saladas. (2.59%), y leche (2.26%), que representan el 72.57% del aporte total. Independientemente del sexo, edad grupo, o macro-regiones brasileñas, los principales contribuyentes a la ingesta de sodio fueron carne de res y platos principales sin procesar. seguido del pan francés. Discusión: Es importante enfatizar que los principales alimentos brasileños descritos como fuente de sodio son parte de las actividades culturales y regionales, aspecto que influye en las elecciones y el consumo de alimentos. Conclusiones: Estos resultados resaltan la necesidad de implementación. de políticas de salud pública para controlar el uso de sodio en la industria alimentaria y para dar a conocer a la comunidad sobre la adición de sal en la preparación de alimentos y la contenida en alimentos preparados

Heat stress in rice vermicelli manufacturing factories.

OBJECTIVE: This study provides an assessment of heat stress in indoor rice vermicelli manufacturing factories. METHODS: Worker interviews and heat stress assessments were conducted in food manufacturing factories in Singapore. The Wet Bulb Globe Temperature (WBGT) and Heat Stress Index (HSI) were used as heat stress indicators. RESULTS: The highest WBGT and HSI levels recorded in the rice vermicelli manufacturing factories were 36.68°C and 3777 in the drying and steaming process respectively. These levels were above the recommended permissible HSI and WBGT action limit for heat exposure and considered to be high risk. CONCLUSION: Workers in indoor rice vermicelli manufacturing factories can be exposed to heat stress, and the current measures in place may not be sufficient to protect workers against heat stress injuries. Preventive measures such as engineering controls and heat acclimatization programs are important.

Incidence of Listeria spp. in Ready-to-Eat Food Processing Plant Environments Regulated by the U.S. Food Safety and Inspection Service and the U.S. Food and Drug Administration.

A multiyear survey of 31 ready-to-eat (RTE) food processing plants in the United States was conducted to determine the incidence of Listeria spp. in various RTE production environments. Samples were collected from 22 RTE plants regulated by the U.S. Department of Agriculture's Food Safety and Inspection Service (FSIS) and from 9 RTE food plants regulated by the U.S. Department of Health and Human Services' Food and Drug Administration (FDA). Only nonfood contact surfaces in the RTE manufacturing areas with exposed RTE product were sampled. Each sample was individually analyzed for the presence of Listeria spp. by using a PCR-based rapid assay. In total, 4,829 samples were collected from various locations, including freezers, equipment framework, floors, walls, wall-floor junctures, drains, floor mats, doors, and cleaning tools. Nine (29%) of the facilities had zero samples positive for Listeria spp. in the production environment, whereas 22 (71%) had one or more samples positive for Listeria spp. The total incidence of Listeria spp. in all RTE food plants was 4.5%. The positive rate in plants regulated by the FSIS ranged from 0 to 9.7%, whereas the positive rate in plants regulated by the FDA ranged from 1.2 to 36%.